Blog Archives

top mistakes that will destroy your appliances

2/27/2023

We rely on our electrical appliances to make our daily lives easier, but some common mistakes can lead to serious damage and reduce the lifespan of our appliances. Here are some electrical mistakes that can destroy your appliances:

Overloading Power Outlets: Plugging too many devices into a single outlet or using extension cords can overload the circuit and cause overheating or even electrical fires. It's important to use power strips with built-in surge protectors and to spread out your devices across multiple outlets.

Neglecting Electrical Maintenance: Regular maintenance of your appliances, such as cleaning or replacing air filters, can prevent damage from wear and tear. Neglecting maintenance can lead to clogged filters, blocked vents, and other issues that can cause appliances to overheat and break down.

Using the Wrong Bulbs: Using bulbs with the wrong wattage or type in your appliances can cause them to overheat and potentially catch fire. Make sure to use the correct bulbs recommended by the manufacturer to prevent damage to your appliances.

Ignoring Electrical Warning Signs: If you notice flickering lights, tripped breakers, or strange noises coming from your appliances, it's important to address the issue immediately. Ignoring warning signs can lead to further damage or even electrical fires.

DIY Electrical Repairs: Attempting to fix electrical issues yourself can be dangerous and cause further damage to your appliances. It's important to hire a licensed electrician in Sarnia to perform any electrical repairs or installations to ensure they are done safely and correctly.

By avoiding these common electrical mistakes, you can help protect your appliances from damage and extend their lifespan. Remember to always prioritize safety and seek professional help when in doubt. Electrician Sarnia is available to assist you when you feel your electrical situation is putting you in danger.

0 Comments

How can you replace bad electrical outlets safely in your home?

2/26/2023

0 Comments

Electrical outlets are an essential component of any home, but over time, they can become damaged or worn out. Not only are damaged outlets unsightly, but they can also be dangerous. Replacing bad electrical outlets is a simple task that you can do yourself, but it's important to do it safely. Here's how to replace bad electrical outlets in your home safely.

Turn Off the Power: Before you start working on the outlet, turn off the power to the circuit that it's on. You can do this by turning off the circuit breaker or removing the fuse that controls the circuit. Use a voltage tester to confirm that the power is off before proceeding.

Remove the Outlet Cover Plate: Use a screwdriver to remove the outlet cover plate. This will expose the outlet and the wires behind it. Carefully remove the screws that hold the outlet in place.

Disconnect the Wires: Gently pull the outlet out of the electrical box, being careful not to touch any wires. You'll see that there are three wires connected to the outlet: a black wire, a white wire, and a green or bare wire. The black wire is the hot wire, the white wire is the neutral wire, and the green or bare wire is the ground wire. Use a pair of pliers to loosen the screws that hold the wires in place, and then disconnect the wires from the outlet.

Install the New Outlet: Install the new outlet* by connecting the wires in the same way they were connected to the old outlet. The black wire should be connected to the gold or brass screw, the white wire should be connected to the silver screw, and the green or bare wire should be connected to the green screw. Tighten the screws securely to ensure a good connection.

Reinstall the Outlet: Push the new outlet back into the electrical box and use the screws to secure it in place. Make sure the outlet is level and flush with the wall. Replace the outlet cover plate and secure it with screws.

Turn the Power Back On: Finally, turn the power back on to the circuit and test the outlet with a voltage tester. If everything is working correctly, the voltage tester should indicate that the outlet is live.

By following these steps, you can safely replace electrical outlets in your home. If you're uncomfortable working with electricity or if you encounter any issues during the process, don't hesitate to call a professional electrician like Electrician Sarnia to help you. Safety should always be your top priority when working with electricity.

*Outlets can be purchased at the following stores in Sarnia:

- Home Depot: 1350 Quinn Dr
- Lowe's: 1390 Quinn Dr
- Rona: 1350 Colborne Rd
- Canadian Tire: Lambton Mall - 1380 London Road

0 Comments

top mistakes that will destroy your appliances

How can you replace bad electrical outlets safely in your home?

Archives

Categories